Replacement Seat For Old Town Canoe (2024)

1. Old Town Style Replacement Seats

  • Simply cut to your desired length and "plug and play." Old Town Style Replacement Seats oldtostrese $42.99 Wood type: Ash Cane Natural(0) ...

2. Replacement Old Town canoe seats - Advice - Paddling.com

  • Sep 13, 2022 · I need to replace both seats in a Penobscot 16. Most replacement seats are 8.5" center to center, but the measurements for my canoe is 8.75" ...

  • I need to replace both seats in a Penobscot 16. Most replacement seats are 8.5" center to center, but the measurements for my canoe is 8.75". So it looks to be 1/8" off for each side- is that a big deal? Should I seek out the exact specifications or will drilling them out not perfectly centered make a difference?

3. Replacement seats for Old Town 12 - Advice - Paddling.com

  • ... a questionable working trolling motor and broken seats. How much are replacement seats and is this a good canoe? I just want to go on local lakes to go fishing…

  • I found an Old Town Stillwater 12 for $350 that comes with a questionable working trolling motor and broken seats. How much are replacement seats and is this a good canoe? I just want to go on local lakes to go fishing. Trying to keep my expenses at a minimum. Thanks.

4. Old Town Canoe Molded Seat with Backrest Stern - TG Watersports

  • Old Town Canoe. MSRP: $73.99. Now: $69.99. Was: $71.99. You can add this backrest to your existing blow-molded polyethylene seat or use as a replacement part.

  • Old Town Canoe Molded Seat with Backrest Stern

5. Old Town Kayak Seat Assembly - Paddlesports Warehouse

6. Canoe Seats - Kenco Outfitters

  • Old Town 34" Cane Canoe Seat. $49.95 ; Old Town Cane Seat Bow and Stern. $59.95 ; Old Town Canoe 34" Web Seat. $44.95 ; Wenonah Canoe Web Seat. $44.95 ; Mad River ...

  • Shop Kenco Outfitters Today. Featuring Clothing & Gear Inspired By Genuine Catskill Mountain Living. Products Made For Fans Of The Great Outdoors Life.

7. Old Town Canoe Molded Seat with Backrest Bow - TG Watersports

  • If you like a low maintenance canoe then replacing your existing seats with a blow-molded polyethylene seat is the way to go. The seat requires no maintenance ...

  • Old Town Canoe Molded Seat with Backrest Bow

8. OT Kayak Seat Assembly [OT-01-1331-0387 (6D1)] - $129.99

  • TopKayaker OT Kayak Seat Assembly [OT-01-1331-0387 (6D1)] - Oversize Shipping Rates Apply! Best used as a replacement seat for Old Town kayaks, ...

  • TopKayaker OT Kayak Seat Assembly [OT-01-1331-0387 (6D1)] - Oversize Shipping Rates Apply! Best used as a replacement seat for Old Town kayaks, such as the Dirigo Solo, and Tandem kayaks circa 2012 to date. Part number 01.1331.0387. Fits other OT kayaks; Loon 111, Solo and Twin Otter kayaks circa 2009 to date. May fit the much older Loon 160T. This

9. ACS2 Seat for Old Town Kayaks

  • ACS2 is clearly better than the older ACS seats in many ways. This is the current and best type of seat used in the best Old Town models that have wider ...

  • Oak Orchard Canoe and Kayak, we ship anywhere in the U.S. and Canada from our great selection of kayaks, canoes, and Yakima - car and truck racks. The best prices and service.

10. Web Seats - Old Town Canoes & Kayaks

  • Jun 14, 2024 · A: Hello fellow canoer! I have the Discovery 133, and it fit perfectly. I got what was listed as the proper middle seat replacement on my ...

  • Upgrade your canoe seat with comfortable and durable web seats. Shop now for the best selection and paddle in style.

11. Molded Seats - Old Town Canoes & Kayaks

  • Seat functions fine when installed but you need the correct tools and some ingenuity….replacing the bow seat will be easier if OTC ever has it in stock…

  • Shop high-quality molded seats for your boat and upgrade your comfort on the water. Experience the best seating options now!

12. Old Town Cane Seat Bow and Stern - Kenco Outfitters

  • Replacement Bow or Stern seat for Old Town Canoes Installation Instructions included.

  • Replacement Bow or Stern seat for Old Town Canoes Installation Instructions included

13. Canoe Seat Wood - Clear Waters Outfitting

  • Replacement canoe seats.Wood selection includes ash, walnut, and cherry. Seat ... Mounting Bolt Spacing for Wide (Old Town) Seats is about 8.75". Minnesota's ...

  • Replacement canoe seats.Wood selection includes ash, walnut, and cherry. Seat material is either webbing or cane. Several size and style options are available. Wooden Canoe Seat For Sale

14. Old Town Padded Kayak Seat

  • Old Town Padded Kayak Seat We have used this seat in Loons, Dirigos, Vapors, Herons, Otters and many other kayaks. Makes a great replacement OR upgrade seat ...

  • Oak Orchard Canoe and Kayak, we ship anywhere in the U.S. and Canada from our great selection of kayaks, canoes, and Yakima - car and truck racks. The best prices and service.

15. Old Town Kayak Parts - Mariner Sails

  • Authorized dealer for Hobie Cats, Windsurfers, Kayaks, Standup Paddle Boards, Thule Racks and all sorts of sailing and kayaking accessories and replacement ...

  • Authorized dealer for Hobie Cats, Windsurfers, Kayaks, Standup Paddle Boards, Thule Racks and
    all sorts of sailing and kayaking accessories and replacement par

16. Old Town Sportsman Replacement Seat for Old ... - Black Hall Outfitters

  • ... Old Town Sportsman Replacement Seat for Old Town Sportsman 106/120 PDL's, Sportsman BigWater 132 PDL's, Predator PDL's, Topwater 106/120 PDL's, and Ocean Kayak ...

  • The Sportsman’s seating system seamlessly fuses comfort and convenience, providing a breathable and fast-drying seat that fits the Predator PDL, Topwater 106/120 PDL, Ocean Kayak Malibu Pedal, and all Sportsman PDL models. It features a backrest that adjusts to fit you, and a compartment for storage. Swift setup and po

17. Replacement Old Town Canoe Seat Back - TopKayaker

  • TopKayaker Replacement Old Town Canoe Seat Back [OT-01-1331-1250 (8E4)] - Best used as a replacement part for Old Town canoes with a Molded Seat Back as ...

  • TopKayaker Replacement Old Town Canoe Seat Back [OT-01-1331-1250 (8E4)] - Best used as a replacement part for Old Town canoes with a Molded Seat Back as shown. NOT a Kit! Hardware and instructions are NOT Included. It is assumed you will re-use your original hardware. These replacement parts are made of black blow-molded polyethylene. Replacement Parts Included: 1 Seat Strap, 1 blow-molded

Replacement Seat For Old Town Canoe (2024)

FAQs

Can you replace canoe seats? ›

Good news.... bench style wood-cane canoe seats are a universal canoe part. Given thirty minutes and simple hand tools you'll have your new canoe seats installed and be ready to hit the water. Do it now and avoid the 'Ah rats!'

How can I make my canoe seat more comfortable? ›

DIY: Padding a Bucket Style Canoe Seat
  1. A quick and easy way to improve the comfort and fit of your canoe seat. ...
  2. Use a pair of scissors to cut a piece of foam slightly larger than the seat. ...
  3. Spray adhesive onto seat using cardboard or masking to prevent overspray. ...
  4. Apply adhesive to the back side of the foam.
Apr 29, 2022

What is the best material for a canoe seat? ›

The best material for a canoe seat is typically high-density foam or gel padding, covered with durable fabric like nylon or polyester.

Can boat seats be replaced? ›

When properly maintained, a quality boat can last indefinitely. However, proper maintenance sometimes includes replacing and refurbishing parts that are subject to wear and tear. Seats are among the most utilized parts of your boat. Thankfully, you can periodically reupholster boat seats to extend their life cycle.

Do I need a canoe seat? ›

However, adding an adjustable canoe seat can make a world of difference on your next paddling trip. A backrest will provide the extra support your body needs, but not just any material will do here; in fact, some seat designs can further contribute to slouching or even make your paddling less effective.

Where should a heavy person sit on a canoe? ›

If you are alone in the canoe, sit in the middle. If there are two people in the canoe, have one sit in the back and one sit in the front, with the heavier person or more experienced paddler in the rear of the boat, called the stern.

Why does my canoe feel unstable? ›

Keeping the center of gravity low helps make any boat more stable. Putting a load in it helps as does kneeling or at least locking the knees against the gunnels as mentioned. In addition... it sure helps if a paddler learns how to use a low brace instinctively.

What is an old town pack canoe made of? ›

The Old Town Pack is made of tough, lightweight Oltonar/Royalex. It's so light that anyone who can paddle solo can carry it; on a portage, to and from the water, on and off the car top.

What to use in a canoe as a seat? ›

So here are the choices:
  • Boat Floatation Cushions on the floor of the canoe. ...
  • Old Town Snap-in Center Seat – This works for some Old Town canoes, and our main canoe is an Old Town Appalachian. ...
  • Mohawk Hanging Center Canoe Seat – This looks interesting.

What is the best height for a canoe seat? ›

When mounting seats for a balanced approach, mount them high enough to get your feet in and out easily. Most paddlers will find about 9 or 10 inches high enough. To make the kneeling position more comfortable, angle the seat slightly forward by raising the seat's rear 1 inch higher than the seat's front.

How to make a canoe seat more comfortable? ›

Wear the personal floatation device and pick up an inexpensive seat cushion for comfort. After several hours sitting upright in a canoe, you might begin to feel some lower back fatigue. A seat-back clips or straps to the canoe seat and offers essential back support and extra comfort as well.

How do you add stability to a canoe? ›

Sculling Brace

This brace is done by sweeping the paddle across the surface of the water, with a slight upward pitch on the blade. This motion provides an extended outrigger for supporting the canoe through the body and preventing the canoe from rolling or tipping to the paddling side.

Can a polyethylene canoe be repaired? ›

You can certainly try to apply repair techniques for linear polyethylene but realistically, the boat will never be the same and should not be subject to the same expectations or the extreme or hazardous use.

How do you change positions in a canoe? ›

The On-Water Position Switch

Instruct the stern paddler to move up to the center of the canoe, squeezing into the middle and crouching as low as possible. The bow paddler moves backwards over the stern paddler, sliding her hands down the gunwales and staying as low as possible.

Can you refinish a fiberglass canoe? ›

Luckily, you can bring your fiberglass canoe back to life relatively easily with a new paint job! First, clean and sand the canoe to prepare it for painting. Make sure to repair any major cracks or gouges with a gelcoat repair kit as well.

How much does a canoe seat weigh? ›

Average weight of an untrimmed seat made with ash and basswood is about 1lb. 12oz. Trimmed for the average solo canoe weight should run close to 1½ lbs.

References

Top Articles
Latest Posts
Article information

Author: Nathanial Hackett

Last Updated:

Views: 6129

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Nathanial Hackett

Birthday: 1997-10-09

Address: Apt. 935 264 Abshire Canyon, South Nerissachester, NM 01800

Phone: +9752624861224

Job: Forward Technology Assistant

Hobby: Listening to music, Shopping, Vacation, Baton twirling, Flower arranging, Blacksmithing, Do it yourself

Introduction: My name is Nathanial Hackett, I am a lovely, curious, smiling, lively, thoughtful, courageous, lively person who loves writing and wants to share my knowledge and understanding with you.